MD32T W/Tilt MasterDrive™ Drive Steering System
Eliminates torque at the steering wheel Three different select-able levels of power give the boater the desired feeling on the wheel (PATENTED). Automatically reverts to manual mode in case of power loss.
High efficiency, low Amp draw The system always running permits immediate control in any sea conditions
Equipped with safety switch ON/OFF (SMART BUTTON) Can be used on dual station installations
Suitable for use with autopilot Low noise Voltage: 12VDC CE marked in conformity with ABYC P21, ISO 10592 safety standards Ignition protected (SAE J-1171 and UNI EN 28846)
MD32-1T W/Tilt MasterDrive™ Drive Steering System
Eliminates torque at the steering wheel Three different select able levels of power give the boater the desired feeling on the wheel (PATENTED). Automatically reverts to manual mode in case of power loss.
High efficiency, low Amp draw The system always running permits immediate control in any sea conditions
Equipped with safety switch ON/OFF (SMART BUTTON) Can be used on dual station installations
Suitable for use with autopilot Low noise Voltage: 12VDC CE marked in conformity with ABYC P21, ISO 10592 safety standards Ignition protected (SAE J-1171 and UNI EN 28846)
What's In The Box System Components 1 single packaged KIT MD32-1T Single Cylinder containing:
- 1 UH32T-With Tilt X66 Master Helm - UC128-SVS 1 Silversteer Hydraulic Cylinder
- 1 UPMD Power Unit, 15’ (4,5 m) wiring harness included
- 1 UCMD User Interface
- 2 OIL 15 bottles of hydraulic oil
This is a standard Outboard kit with tilt helm that does not include Hose Kits and Steering wheel. See Cylinder model chart for correct engine application.
The MasterDrive™ helms (both the UH Master and the UHD slave for a dual station), the UPMD Power Unit and the UCMD User Interface are the same products shown on the outboard MasterDrive™ system.
For more details please refer to the Outboard MasterDrive™ chart below
