A93X36 36" Triple Outboard Engine/Twin UC128-OBF Or UC128-SVS Cylinder Tie Bar
Suitable for applications with triple outboard engines and dual cylinders UC128-OBF (or UC128-SVS)
A93 x 36 36" (913.4 mm) triple engine centers
Heavy duty triple engine/twin cylinder tie bar kit for use with UC128 and UC128P “Port” version outboard cylinders. Suitable for use with Protech and SilverSteer™ cylinders these AISI 304 electropolished and passivated stainless steel tie bars are simple to install and allow for independent trimming of engines with minimal effect on engine alignment.
A93 x 36 36" (913.4 mm) triple engine centers
ATTENTION: As the tiller arm position varies from engine to engine and the distance between two engines is not predictable, unexpected interferences may occur while tilting.
![A93 Specification](/Assets/UflexPics/A93spec.jpg)
A duly check of the tie bar installation is then strongly recommended. Should you need additional information, please do not hesitate to refer to our Technical Service.
![A93 Specification](/Assets/UflexPics/A93spec.jpg)
![A93 Engine Example](/Assets/UflexPics/A93spec2.jpg)
You can be the first one to write a review.
![loading](/Content/ajax-loader-small.gif)